| Simple test technique s |
No special skills to be acquired |
| Non-destructive test procedures |
No damage to instruments from test systems |
| Fault indication by audible or visual signal s |
Reproducible results |
| Isolated from electrical mains |
Technical support from a British manufacturer |
| Accurate system settings |
Maintenance programme and re-callibration service available (where appropriate). |
| Fully supported by manufacturer/distributor |
Compatible with Quality/Health & Safety initiatives |
| Compatible with ISO Standard and CE marked |
|
|
| Pinhole Detector - PHD6Kv for Diathermy Instruments
 The PHD6Kv is the device of choice for ensuring the the insulation on diathermy instruments is intact and the instrument will not pose a hazard to either an operator or a patient. The device is powered by a re-chargable battery. No special technique is required and audible and visual indicators confirm fault detection. The testing procedure itself will not damage instuments being tested.
PHD6Kv Detector
Battery, earth lead, built-in charger
Mains lead,drum brush electrode
Hospital test base
Test leads
Instruction manual
|
|
Continuity Tester - CT9v for Diathermy Cables 
The CT9v will detect open circuit faults on diathermy Leads with 4mm plug ends or hook ends; an adapter is available for testing leads with Bovey 8mm plug ends.
The unit can also be used to test Bipolar Leads fitted with twin 4mm plugs for open circuit faults. Adapters for other machine-end connectors may be available.
The Continuity Tester is supplied complete with a PP3 9V battery and full operating instructions.
|
|
 Finger Switch Test Unit - FST1 for hand-switching pencils
The FST1 can be used to confirm that hand-switching pencils are working correctly. A colour-coded L.E.D sequence will expose any defects in the switching mechanism. A battery test button has also been included.
|
